Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need 54" quick opening vessel body flange 1

Status
Not open for further replies.

erwo

Petroleum
Dec 2, 2002
3
0
0
NO
Ladies and Gentlemen,

Our 54" 150# water filter vessels are equipped with two body flanges for internals changeout. These are fitted with 48 or so bolts each.

It would be a great relief during maintenance to have a quick opening device, like a pig launcher door or clamp. I contacted Grayloc, but they do not have anything this size. Due to rubber lining, flange compression should be quite uniform.

I welcome suggestions for better solution to this irritating flange design!

Regards,

Erik A. Wolff
erik.wolff@no.abb.com
T: +47 6684 3494 / 9083 1633
 
Replies continue below

Recommended for you

This is skirting the issue somewhat, but do your mechanics/operators use an impact wrench? We have many similar flanged ports on vacuum equipment, and we use an electric impact wrench. It makes the job go quicker, and they can pretend they are on a NASCAR pit crew changing tires.
 
Status
Not open for further replies.
Back
Top