Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need a 390 Deg F 2-way control valve w/ electric actuator

Status
Not open for further replies.

BronYrAur

Mechanical
Nov 2, 2005
798
Looking for a 1-1/2" 2-way modulating control valve with electric actuation for a 390 deg F high-temp hot water application. I am only finding pneumatic valves are that temp. Any suggestions
 
Replies continue below

Recommended for you

You may find electro-hydraulic actuators. Also the actuator is not exposed to the 390 degree F temperature unless located inside an oven.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor