Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need a 4-bit ram cell design

Status
Not open for further replies.

isa

Geotechnical
Apr 16, 2002
3
I am designing a ram cell circuit and would appreciate some reference designs and hints on a simple 4-bit ram cell capable of storing up to 8 numbers.
Thanks
 
Replies continue below

Recommended for you

Hello Again,

I see you arrived at this forum ok.

As far as your problem goes, a 4 bit ram cell which displays 8 numbers ?. Do you mean its addressable up to 4 bits (4x8) or it contains 4 bits (8x4).

As I mentioned in your previous post (in the Electronic Component engineering forum), as this is course work it would be improper for anyone to just give you the answer in the form of a diagram.

If you want to send what you have and where you are up to and where you are stuck then perhaps you could be guided past your inpass.

Any help ?, yes no let me know.

Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor