Need a favor opening a file 2

[macduff]

Hello ProE Forum,
Does anyone have software to open and save this file for me? If so, can you save as a PDF, DWG or DXF. I belive its CoCreate software.

Many Thanks,

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 XP Pro SP 3 (32-bit)
Xeon CPU 2.53 GHz 3.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer

 

[jbeckhou]

hooked up! you can download creo elements for free from PTC website.


Petrotrim Services
www.petrotrim.com

 

[CorBlimeyLimey]

Unfortunately the free version of Creo doesn't save the PDF, DWG or DXF formats macduff requires.

 

[macduff]

jbeckhou, thank you very much for taking the time to do this for me.

Best,

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer

 

[jbeckhou]

FYI. I was able to print a PDF from the free version.

Petrotrim Services

http://www.petrotrim.com

 

[macduff]

really? can you please send me the direct link for download?

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer

 

[jbeckhou]

http://www.ptc.com/products/creo-elements-direct/modeling-express/

Petrotrim Services

http://www.petrotrim.com

 

[macduff]

thank you

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer

 

[CorBlimeyLimey]

jbecjhau ...

Are you using Express 4 version?
I don't have the PDF option.

 

[CorBlimeyLimey]

"I was able to print a PDF" ... of course!

 

[macduff]

That's how I found it too CBL. At first I went to file "Save As" and found nothing for PDF (and thought jbeckhou was a lier for a minute LOL!) then went to print and found it there.

I'm trying to find a work around to copy the geo and save it as a dwg or dxf, but the folks at PTC are pretty darn smart securing the geo. Copy and paste into Solidworks or Draftsight doesn't seem to work.

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer