Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need a valve engineer

Status
Not open for further replies.

wafflestiger

Mechanical
Mar 25, 2007
2
Can anybody help? I have a 10" bfv on site with a automax actuator fitted with a PMV EP5 positioner. The positioner needs recalibrating. Does any body know a service engineer in the UK who could help?
 
Replies continue below

Recommended for you

Automax and PMV are Flowserve products so I suggest you contact your local Flowserve office.
 
You can get the brochure here. A P5 is the positioer equivalent of an AK47. Really easy to work on with primitive tools. About all you need is a medium flat-blade screwdriver.

I pulled all this from the Flowserve.com website:

Flowserve have a plant in the UK:
Flowserve Limitorque Ltd.
Euro House Phone: +44-1635-46999
E-mail: ahole@flowserve.com
Abex Road Fax: +44-1635-36034
Website: Newbury Berkshire RG14 5EY United Kingdom RG14 5EY
Type: Plant Sites
Brands: Automax, Limitorque, PMV

Contact Name (Title) Phone Mobile Fax E-mail
Andy Hole (Sales Manager) +44-1635-516315 +44-7713-501752 +44-1635-36034 ahole@flowserve.com
Tim Dent (Spares & Service Manager) +44-1635-516311 +44-7713-502203 +44-1635-552733 tdent@flowserve.com
John Robinson (Internal Sales Manager) +44-1635-516317 +44-1635-36034 jrobinson@flowserve.com
Paul Phillips (Spares Co-ordinator (Limitorque)) +44-1635-516316 +44-1635-552733 pphillips@flowserve.com
John Barraclough (Technical Sales Manager) +44-1635-516326 +44-7713-502205 +44-1635-36035 jbarraclough@flowserve.com
Mark Stacey (Regional Sales Manager - Middle East) +44-1635-46999 +971-50-818-3551 +44-1635-36034 mstacey@flowserve.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor