Does anyone know of amine SCC tendancy (if any) of duplex Al2003. We would like to use it in a DEA regenerator service in place of 316 stainless steel to avoid piping support changes due to the CTE differences. Operating temperature is typically >250 F. I am not worried so much about chloride SCC as I am about amine. However, if you have chloride SCC info for that service, it would be helpful.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need Amine SCC tendancy for Duplex Al2003
- Thread starter kevlar49
- Start date
EdStainless
Materials
virtually all of the duplex alloys will behave the same. If you can find data for 2205 consider it usable.
= = = = = = = = = = = = = = = = = = = =
Plymouth Tube
= = = = = = = = = = = = = = = = = = = =
Plymouth Tube
- Status
Similar threads
- Locked
- Question
- Locked
- Question