Need drafting view in wcs of work part

[ninerocket1]

I am working with a part that I used the orient wcs to be able to machine some electrodes........When I try to bring it into drafting, the views come in with absolute positioning. What do I need to do to bring them in on the wcs I have created.
Thanks in advance.......Jim Walker

 

[looslib]

Orient the view to your WCS and then save the view as a new view name; my_view1, etc. Insert the new named views on to your drawing.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[ninerocket1]

Thanks for your help. I knew there was an easy way to do that.

Jim Walker
Lorentson Mfg Southwest