Jun 6, 2013 #1 rdln Automotive Apr 18, 2010 25 0 0 US This must be a Solidworks 2013 file, I can preview but not open. It is a trailer axle assembly, can one of you kind soles please save as .stp? or .igs TIA, Steve
This must be a Solidworks 2013 file, I can preview but not open. It is a trailer axle assembly, can one of you kind soles please save as .stp? or .igs TIA, Steve
Jun 6, 2013 #2 CorBlimeyLimey Mechanical Nov 5, 2003 15,292 1 0 CA Here's a Parasolid, STP & IGS file. The SW part was all surfaces, but I didn't check to see how watertight they were. You may have some fixing to do. http://files.engineering.com/getfile.aspx?folder=4f42074e-bcc3-4569-8c6a-bb6b2ed630ef&file=FR-2000_B_RH_with_hub.zip Upvote 0 Downvote
Here's a Parasolid, STP & IGS file. The SW part was all surfaces, but I didn't check to see how watertight they were. You may have some fixing to do.
Jun 6, 2013 #3 SBaugh Mechanical Mar 6, 2001 6,684 0 0 US Here you go... I saved it as a Parasolid Link Scott Baugh, CSWP Berry Plastics Cad Admin\Design Engineer GEASWUG Greater Evansville Area SWUG Leader http://www.scottjbaugh.com "If it's not broke, Don't fix it!" Click to expand... faq731-376 Upvote 0 Downvote
Here you go... I saved it as a Parasolid Link Scott Baugh, CSWP Berry Plastics Cad Admin\Design Engineer GEASWUG Greater Evansville Area SWUG Leader http://www.scottjbaugh.com "If it's not broke, Don't fix it!" Click to expand... faq731-376
Jun 6, 2013 Thread starter #4 rdln Automotive Apr 18, 2010 25 0 0 US looks good, thanks again. Upvote 0 Downvote