ShawnAPR
Mechanical
- Dec 12, 2019
- 2
Hello all!
I am struggling to create a checklist for vetting equipment to comply with NACE MR0175 and MR0103 for use in sour environments.
Based on these codes, there are a few things that would validate equipment. Hardness tests, material traceability reports, weld certifications, forging process and any post treatments, HAZ information..etc..
However within the codes there isnt really a clear definition of requirements such as, the material traceability report must comply with ASTM xxxx or comply with this code.
Maybe something like this exists, or maybe it would be too vague to make.
If anyone can lead me in the right direction that would be great!
I am struggling to create a checklist for vetting equipment to comply with NACE MR0175 and MR0103 for use in sour environments.
Based on these codes, there are a few things that would validate equipment. Hardness tests, material traceability reports, weld certifications, forging process and any post treatments, HAZ information..etc..
However within the codes there isnt really a clear definition of requirements such as, the material traceability report must comply with ASTM xxxx or comply with this code.
Maybe something like this exists, or maybe it would be too vague to make.
If anyone can lead me in the right direction that would be great!