Need help with adding tapped holes

[antillio]

I need help bolting things together in Pro E Wildfire 4.0.

For example if I go to the carr lane website and download the clamp (550LHTC) and want to assemble it to a base plate.

How do I create tapped holes in the base plate from the position of the clamp.

If I move the clamp in an assembly, I want the holes to move with the clamp.

Any help is appreciated!!

 

[looslib]

Mke your baseplate the working part in your assembly and link the clamp hole axis to the tapped hole in the baseplate.

If you want them all to move, you will need to link them with relations.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli