I have a dry sump and need a valve on the drain. This valve will need to be closed from time to time, and then opened with the sump full. I would like to avoid creating a "valve box" in the concrete, due to the fact that whatever sealant I would use for the box would have to be appropriate for 95% H2SO4. Any experience or suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need help with sump drain design
- Thread starter josephn16
- Start date
Similar threads
- Question
- Locked
- Question
