Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

need some clarifications on Darcy's equation

Status
Not open for further replies.

petspec19

Petroleum
Oct 25, 2012
4
0
0
KZ
Hello,

In Darcy's equation for velocity:

v=5.615*0.001127*k/mu*dp/dr

what does 5.165 account for? I know 0.001127 accounts for conversion to field units.



Thanks.
 
Replies continue below

Recommended for you

I'm not familiar with that version of D'Arcy (there are many versions), but 1 bbl = 5.61458 ft^3. Too much of a coincidence for that not to be what is going on.

David Simpson, PE
MuleShoe Engineering

"Belief" is the acceptance of an hypotheses in the absence of data.
"Prejudice" is having an opinion not supported by the preponderance of the data.
"Knowledge" is only found through the accumulation and analysis of data.
The plural of anecdote is not "data"
 
God no. Where the hell did you get a velocity out of a simple volume conversion?

David Simpson, PE
MuleShoe Engineering

"Belief" is the acceptance of an hypotheses in the absence of data.
"Prejudice" is having an opinion not supported by the preponderance of the data.
"Knowledge" is only found through the accumulation and analysis of data.
The plural of anecdote is not "data"
 
Status
Not open for further replies.
Back
Top