Nov 4, 2004 #1 MxRacer Mechanical Oct 15, 2004 1 Where can I find 2-D Ibeam profiles? I need the radius and angle information for the web area. Thank you gentlemen.
Where can I find 2-D Ibeam profiles? I need the radius and angle information for the web area. Thank you gentlemen.
Nov 4, 2004 #2 SBaugh Mechanical Mar 6, 2001 6,686 If you have Toolbox they are in there. Otherwise You may have to keep searching the web, because I don't know of any place that gives these out for free. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376 Upvote 0 Downvote
If you have Toolbox they are in there. Otherwise You may have to keep searching the web, because I don't know of any place that gives these out for free. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376
Nov 4, 2004 #3 CorBlimeyLimey Mechanical Nov 5, 2003 15,292 Check thread404-106590 for some tips on this Upvote 0 Downvote
![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")