Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need to know the corrosion resistant alloy INC 625 for wellhead equipment Hardness requirements

Status
Not open for further replies.
GJayaprasad

GJayaprasad

Petroleum
Mar 17, 2014
1
Hi All,

please anyone can help me out.

Need to know the corrosion resistant alloy INC 625 for wellhead equipment Hardness requirements.
And which code or standard need to refer.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

AjSCCMelt
  • Locked
  • Question
Heat Treatment cycle to achieve hardness of 400-500 BHN in alloy steel casting.
Replies
7
Views
526
EdStainless
EdStainless
Stefan2211
  • Locked
  • Question
Alloy 625
Replies
4
Views
111
Stefan2211
Stefan2211
mechdude777
  • Locked
  • Question
Galvanic Corrosion Between Alloy 800 and 825 Weld
Replies
1
Views
184
EdStainless
EdStainless
Dusty Dave
  • Locked
  • Question
Failure of Wind Fence due to corrosion
Replies
4
Views
692
Tensile_test_my_spine
Tensile_test_my_spine
jessieleo99
  • Question
Micro cracks appear in ALSi10Mg alloy castings
Replies
2
Views
1K
swall
swall

Part and Inventory Search

Sponsor

Back
Top Bottom