RathodAsit
Mechanical
- Oct 9, 2015
- 23
Dear All,
I needed to convert solid3D Sheetmetal parts/Assy to Surface Model for simulations, I needed Surface Assembly so I can apply the 2D Shell Element and run the Analysis for Different Material thickness?
I tried with Offset surface option to create mid plane surface, and then delete body command to delete the body, I left with the surface assembly, but surface are not connected to each other and there are open gap between surface assembly? See attached Image
1. How to join the surface with each other, so there it will connected to each other?
2. Is there any other option/Command I can directly created surface?
Thanks in advance.
Best Regards
Asit
I needed to convert solid3D Sheetmetal parts/Assy to Surface Model for simulations, I needed Surface Assembly so I can apply the 2D Shell Element and run the Analysis for Different Material thickness?
I tried with Offset surface option to create mid plane surface, and then delete body command to delete the body, I left with the surface assembly, but surface are not connected to each other and there are open gap between surface assembly? See attached Image
1. How to join the surface with each other, so there it will connected to each other?
2. Is there any other option/Command I can directly created surface?
Thanks in advance.
Best Regards
Asit