Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Neoprene compression behaviour

Status
Not open for further replies.
JFre

JFre

Mechanical
Nov 13, 2013
5
0
0
GB
Hi

I am trying to track down some compression stress-strain tables for Neoprene rubber (Polychloroprene), IRHD 60. I have a problem which is very sensitive to the amount of compression that the neoprene can withstand in a region with a free edge (it is free to bulge).

Any suggestions?

Thanks
 
Status
Not open for further replies.

Similar threads

Crystal P
  • Locked
  • Helpful tip
Compression Set Tested by Compression Set Fixture 1
Replies
1
Views
8
GrahamBennett
GrahamBennett
nadherrr
  • Locked
  • Question
HNBR sh70 compression
Replies
0
Views
8
nadherrr
nadherrr
blckwtr
  • Locked
  • Question
Over compression
Replies
1
Views
6
Ahmad Uzair
Ahmad Uzair
Pete51
  • Locked
  • Question
Cure systems for Low Compression Set in NR
Replies
3
Views
16
GrahamBennett
GrahamBennett
Emma Gibney
  • Locked
  • Question
Shore A properties under compression
Replies
2
Views
4
GrahamBennett
GrahamBennett
Back
Top