Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Network Analyzer - at affordable price

Status
Not open for further replies.
Thanks a lot! That one seems to take over where the C60 can't any more (C60: 10 Hz - 4 MHz and the LA19-13 starting at 3 MHz). I am in the LF part of the spectrum, actually I could use a box delivering millihertz like the HP 3665A did. But do not want such a huge box. And expensive.

Gunnar Englund
 
Hi Skogsgurra / Comcokid,
They both look nice.....Do you guys know any
equipment that i can use down to 0.1Hz frequency and upper range 1.5Khz to use as spectrum analyser??
 
Another one on page 28, Oct 14, 2006 issue of Electronic Design. This is an antenna analyzer, but could be used as a 1-port network analyzer. AntennaSmith made by Timewave Tech Inc. 0.2 to 55 MHz range and includes TFT color display. Article indicates retail price of $1200.

 
Status
Not open for further replies.
Back
Top