New Drawing Templates

[ditchpanther]

I was wondering if there was an easy way to transfer drawings from an old drawing template to the new one I created for ISO 9001. These old drawings contain views, dims, break outs, boms, rev blocks, etc. I just don't want to have to start from scratch on these files and redo all of them on our new template. I also have Productstream and I am Using vault. Any help would be greatly appreciated.


Thanks
Ditch

 

[aardvarkdw]

Open the old drawing.
Open a blank drawing that is made from your new template.

Option 1 (replace title blocks only)
Delete the old title block both from the view and from the drawing resources folder.
Copy the title block from the new drawing to the old one and paste into drawing resources folder.
Insert new title block.

Option2 (Place old views into new drawing file)
In the model tree, select all views.
RMB, copy.
Paste into new drawing.

David