vorwald
Aerospace
- May 25, 2001
- 94
OK, I took a week of CATIA V training a while back (maybe six years). And I know I have a workbook somewhere, but .... I need to generate dimensioned drawings of assemblies built up from v4.2 models. I need both exterior and cross section views. Can someone give me enough detailed steps so I can do this task (ocassionally, once every 18 months). I will also have to convert some of the exterior surfaces to IGES. I spent a couple of days stumbling around menus / options trying to remember how to dimension an assembly, but, all I've ended up with is some views that are from a large distance from the assembly (the assembly is very small). When I zoom fit the assembly drawing view, it only has partial lines of the exterior edges of the assembly. I haven't added any dimensions yet to these views