Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nicro Brazing
- Thread starter spoolguy
- Start date
Brazing with a nickel / chrome braze alloy.
See:
Much higher temp than soldering
Tom
See:
Much higher temp than soldering
Tom
spoolguy,
For future ref, by definition 800F is the dividing line between soldering and brazing although Silver base alloy brazing is also commonly referred to as Silver Soldering.
Nicrobraz is a trade name. I think it might be Wallcolmonoy's referenced by KDM8011. I think it is a Nickel base braze alloy and usually done by furnace brazing.
Jesus is THE life,
Leonard
For future ref, by definition 800F is the dividing line between soldering and brazing although Silver base alloy brazing is also commonly referred to as Silver Soldering.
Nicrobraz is a trade name. I think it might be Wallcolmonoy's referenced by KDM8011. I think it is a Nickel base braze alloy and usually done by furnace brazing.
Jesus is THE life,
Leonard
JimMetalsCeramics
Materials
Most brazes are silver and copper-based alloy compositions. Nicrobrazes are Ni-based. They are stronger and survive higher temperatures. Wal Colmonoy is the only company I know who makes these.
- Status
