Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nitric acid and pvdf

Status
Not open for further replies.

Husnam

Materials
Jun 29, 2018
3
Does nitric acid diffusion into Polyvinylidene Fluoride affect the mechanical properties of the plastic?
1) Is Polyvinylidene Fluoride chemically compatible with Nitric acid 45 % at 70 C?
2) And, will it diffuse and affect its mechanical properties?
 
Replies continue below

Recommended for you

The book Chemical Resistance, Volume 1 - Thermoplastics, Second Edition says that PVDF exposed to 45% nitric acid at elevated temperature has a resistance of 8. That means 90-94% retention of mechanical properties and no substantial change in dimensions or appearance. They define elevated temperature as tests done at 45°C and above.

Chris DeArmitt PhD FRSC
President

Plastic materials consultant to the Fortune 100
Creating New Materials - Problem Solving - Innovation Keynotes - Expert Witness
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor