No "mass" in assemblie

[JJL79]

I have a couple of assemblies that does not set proper mass value on save. I got "generate weight data" checked but still mass is 0.0kg. All parts in the assemblies does have a mass value.

 

[JohnRBaker]

NX does not save the weight of assemblies with the part file.

Please contact GTAC and have them open an ER (Enhancement Request) as this is being considered for a future version of NX and we need all the help that we can get to show that customers actually need this capability (internal 'votes' only go so far).

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[JJL79]

We have a column with weight in our parts list in drawings and some assemblies in the parts list displays weight and some dont. I guess it is because the parts in the assemblies that shows weight has linked bodies.

Do you have any advice on how to deal with this problem?