Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NODE SELECTION

Status
Not open for further replies.

Maraach

Mechanical
Apr 22, 2007
9
ES
Hi;

I want to select nodes that are associated with solids (I want to create one group for each FEM element associated with my solids, but i have to mesh two solid at the same time becouse i have to assembly them). I want to do this, bacouse i would like to plot FEM solid's results individually.

Can anybody help me?

Thanks again.
 
Replies continue below

Recommended for you

Can you be more clear. You have two solids that you want to assembly mesh. Are the two solids in different groups? You could hide one of the solids and go to Tools--FEM---Node--Associate--Solid--Apply in List A and add to group. Then select elements associated with these nodes typing 'lista' in the blank area. Meaning:
Tools--FEM---Element--Associate--Nodes--List A -- apply in List B and add to group.

Hope this helps

harry
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top