Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Non-Three Phase Breakers Question
- Thread starter EECR7
- Start date
Deer Mr. EECR7 (Electrical)(OP)7 Sep 22 17:02
[COLOR=#204A87[i]]".... is it possible to have a 2-pole circuit breaker with adjustable LSI settings? "[/i][/color]
1. YES, most CB manufactures do have LSI settings in their 1,2 and 3-pole in their production.
2. FYI: In case 2-pole breakers are not available, you may use a standard 3-pole breaker wire with say L1 straight through but L2 outgoing wire to L3 incoming terminal, i.e. L2 and L3 in series. There is no change in the setting.
Che Kuan Yau (Singapore)
[COLOR=#204A87[i]]".... is it possible to have a 2-pole circuit breaker with adjustable LSI settings? "[/i][/color]
1. YES, most CB manufactures do have LSI settings in their 1,2 and 3-pole in their production.
2. FYI: In case 2-pole breakers are not available, you may use a standard 3-pole breaker wire with say L1 straight through but L2 outgoing wire to L3 incoming terminal, i.e. L2 and L3 in series. There is no change in the setting.
Che Kuan Yau (Singapore)
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question