Norms to metrics drawing 1

[SunVV]

Hi!!! Every body

I want to know about the standarization to metrics drawing it is possible. because I've not found it..

Thanks

Eng. MG

 

[johnwm]

You could always do a search on this forum, or on the ISO site:

http://www.iso.org/iso/en/CombinedQueryResult.CombinedQueryResult?queryString=ISO+2768

You're probably looking for ISO 2768

Good Luck
johnwm
________________________________________________________
To get the best from these forums read faq731-376 before posting

Steam Engine enthusiasts:

http://www.essexsteam.co.uk

 

[looslib]

What aspect of the drawing do you want to ISO specs?

2768 deals with dimensioning.
Others deal with GD&T, drawing formats, etc.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[jsummerfield]

NIST Special Publication 330

NIST Special Publication 811

40334 Federal Register / Vol. 63, No. 144 / Tuesday, July 28, 1998 / Notices

IEEE/ASTM SI 10™-2002 American National Standard for
Use of the International System of Units
(SI): The Modern Metric System

John