An injection moulded part used in a coffee machine seems to loose strength with time/use and break. New mouldings have more than adequate strength for the job. Has anyone experience with ageing of Noryl in a damp coffee/milk environment. Examination of failed parts(broken edges) shows no obvious sign of fatigue, but its complicated by the fibres in the break. Ideas on what to look for ?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Noryl GFN2 (20% glass fibre) fatigue
- Thread starter furneaux
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question