Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Notification for the three threads sent!!!

Status
Not open for further replies.

Kays

Industrial
May 7, 2005
5
0
0
TN
i know there is a mscomm control to do it but i want the code lines! to send an information over the RS232 port in VB 6.0! and receive information from the same port!!! thank you for your help!!!
 
Replies continue below

Recommended for you

Status
Not open for further replies.
Back
Top