Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NPT thread in weldment?

Status
Not open for further replies.
TKSINC

TKSINC

Mechanical
Joined
Oct 3, 2003
Messages
6
Location
US
Is there a way to add a NPT style thread feature to a hole in a weldment? The thread feature does not seem to be an option under the machining section of the weldment and NPT is not listed under the hole feature. BTW, I currently am still on v8.0 but should be upgrading to v10 once my software arrives.

Thanks for any help.
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
TABLE move in Inventor.......
Replies
1
Views
1K
CAD2015
CAD2015
duk748
  • Locked
  • Question Question
complicated process in turning solid parts to weldment assemblies
Replies
1
Views
492
looslib
looslib
Tmoose
  • Locked
  • Question Question
what does MSBR mean in Inventor model tree ?
Replies
1
Views
943
btrueblood
btrueblood
imti7
  • Locked
  • Question Question
How to connect two solid sections tangentially in Inventor?
Replies
0
Views
896
imti7
imti7
CAD2015
  • Question Question
Inventor 2026 ...................
Replies
2
Views
13K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top