Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

nut A194 8MA

Status
Not open for further replies.
Replies continue below

Recommended for you

Sort by date Sort by votes
As far as I can tell from ASTM A194, the chemical compositions are the same but the manufacturing process and heat treatment is different. This results in hardness range requirements of Brinell Hardness 126 - 300 for 8M and 126 - 192 for 8MA.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Daren Samy
  • Locked
  • Question
Use of Disc Nut in Globe Valve
Replies
7
Views
8
TugboatEng
TugboatEng
trentar
  • Locked
  • Question
NACE list of materials forbolts and nuts at valve
Replies
1
Views
4
SJones
SJones
Peter Lupien
  • Locked
  • Question
Bronze Stem Nut
Replies
4
Views
5
Isha90
Isha90
Isha90
  • Locked
  • Question
Hex cap screw or Stud nut for RTJ Cover joint 1
Replies
3
Views
4
Isha90
Isha90
ballvalve1337
  • Locked
  • Question
NACE MR0175 compliant stainless steel bolts/nuts
Replies
12
Views
13
ballvalve1337
ballvalve1337
Back
Top