NX 1847, placing datums, smart curves on component from higher assy

[3dr]

changes component to active work part by default.

If you want to place smart curves or datums on a component it won't allow it.
The part you touch becomes active and the feature goes into that part.


There must be a customer default for this.



Dave
Automotive Tooling / Aircraft Tooling / Ground Support Structures

NX11, Win 10 Pro

 

[3dr]

It's a new customer default
"Allow Work Part Change"

Modeling, General Tab, at the bottom.




Dave
Automotive Tooling / Aircraft Tooling / Ground Support Structures

NX11, Win 10 Pro

 

[jerry1423]

Thanks for the update.

Jerry J.
UGV5-NX11