NX 8.5 - Cross Hatch In Drafting

[ARToolingEngineer]

Greetings,

I have a section view that I just placed and the cross hatching is multiple lines at different angles. I would like to display just the simple hatch at 45 degrees or -45 degrees for bodies next to one another. Can someone help me adjust settings for the cross hatch?

Thanks,BW

 

[Toost]

Is this an assembly , multiple different parts ?
Edit the view- Section settings- assembly crosshatch off

Regards,
Tomas

Never try to teach a pig to sing. I wastes your time and it annoys the pig.

 

[ARToolingEngineer]

It is an assembly. I'll try what you suggest