Proizvodnja
Mechanical
How to remove in a planar mill these leftovers in corners. I used different machining strategies but they all result the same outcome regarding leftovers more or less.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
NX CAM planar mill
- Thread starter Proizvodnja
- Start date
- Status
Planar mill uses boundaries to contain the tool path. It is not "Smart"
This look like a good application of Cavity Mill, which uses the solid bodies to determine the cut volume.
You could still use Cavity Mill to clean up the uncut area by using 3-D In Process Workpiece.
John Joyce
Manufacturing Engineer
NX 2007 Vericut 9.2.2
“Opportunity is missed by most people because it is dressed in overalls and looks like work.” - Thomas Edison
This look like a good application of Cavity Mill, which uses the solid bodies to determine the cut volume.
You could still use Cavity Mill to clean up the uncut area by using 3-D In Process Workpiece.
John Joyce
Manufacturing Engineer
NX 2007 Vericut 9.2.2
“Opportunity is missed by most people because it is dressed in overalls and looks like work.” - Thomas Edison
- Thread starter
- #3
Proizvodnja
Mechanical
I tried different things, including the rest mill for a corner, and keep getting the error message "the part cannot be cut at any levels".
Also, what does tool overhang mean?
Also, what does tool overhang mean?
- Status
Similar threads
- Locked
- Question