NX - CMM (Valisys) PC-DMIS changeover

[jvanwhy]

Hello,

We currently utilize Valisys for our CMM inspection programming (NX is moving it to NX - CMM). We have been using Valisys for about 18 years and it is the only cmm software I am truly familiar with. I am currently researching the practicality of changeover to PC-DMIS and was looking for any input anyone may have on the issue.

Thanks,

John

 

[SDETERS]

Here is a thread they talk about PC DMIS

http://www.eng-tips.com/viewthread.cfm?qid=315693

I had this in my archive. I do not know if they talk about Valisys or not.