Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX-Electrical routing, terminals on added part in assembly invisible, visible in part design only

Thread starter Bogdan1985
Start date Dec 22, 2016

Status: Not open for further replies.

Dec 22, 2016

Bogdan1985

Mechanical

Hi Community,

now is start recently with electrical design in NX8.0. I made my first socket and added the first 5 terminals, visible as lines and arrows.
But visible only in PART DESIGN not when I loaded the part to an ASSEMBLY. Parts and Assemblies are in electrical routing modus.

I started an new assembly added the fresh designed socket - and bad surprise: no terminal symbols visible.

Maybe I touched accidently a wrong button or created a key combination.

See attached images. Maybe one of you know the reason and can help me.

Thanks

http://files.engineering.com/getfile.aspx?folder=ef097af7-c624-459d-9e0e-c865f50b978e&file=terminal-lines-and-symbols-invisible_in_assemblies.jpg