NX Machinery Library 'White Paper' 1

[JohnRBaker]

We have prepared a 'White Paper' covering the processes and procedures for creating your own 'content' for the 'NX Machinery Library' (one capability of the Reuse Library introduced in NX 5) so as to take maximum advantage of what we have currently implemented. Note that the content (standard hardware and parts) which we are providing (via download from GTAC) with NX 5 and NX 6, was created using these guidelines and procedures.

Attached is a zip file containing the 'White Paper' as well as some other files which will help you get started.

Anyway, have fun and good luck.

John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[potrero]

John,
Awesome! Thank you. This kind of work on your part is invaluable to the community.

 

[JohnRBaker]

I can NOT take credit for the contents of the document, however I was one of several people who lobbied for the publication of a document like this. The real work was done by a small but dedicated team of software developers and subject-matter experts.

John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.