NX motion simulation books, tutorials

[JusTaBeginner]

Hello,
My company has just adopted the NX7.5, and although 99% of the time we use the modeling module, we also have a simulation module for which the company doesn`t plan any courses, that is for my department.
I would like to learn it on my own, it would help me verify some of the projects.,but when using I get a lot of confusion on what to do. Are there any online tutorials or book that could guide me through some of the basics.
I really would appreciate any help.
Best regards

 

[looslib]

See if there is anything on this site:

http://nxtutorials.com/

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[JusTaBeginner]

Well there are a few, yet the regard the gear mechanisms. But can`t find any website or book to help guide through the options the module offers.
What I would like to do for start is to define a revolute mechanism of a door and it`s hinge so that they would only open for in example 90 degrees. As far I have successfully managed to set the rotation of the door, but the limits box seems to be useless.

 

[wackolacko]

It's not free, but might be worth the investment.

http://www.myigetit.com/vault/course.aspx?cid=5142

John Lackowski
NX Support
Win 7 64bit NX 7.5.4.4 TC 8.3.1.1