Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX/TC Alternate ID

Status
Not open for further replies.
CADuserNX

CADuserNX

Mechanical
May 1, 2015
1
Question: How do you display the Alternate ID in the "NX 9" Assembly Navigator? Also, is it possibly to display the Alternate ID in the drawing title block?

Currently, I have Alternate ID's displayed on the "Teamcenter 9" side. Do I need to setup a "ID Display Rule" within TC, if so, any suggestions on how? Because I am aware that NX has preferences related to Teamcenter Integration ID display rules.

Any insight on this topic would be great, thanks.
 
 http://files.engineering.com/getfile.aspx?folder=9905efaa-85eb-495e-ac92-45b0b195bd26&file=TC_integration_preferences.png
Status
Not open for further replies.

Similar threads

Befuddled
  • Question
Create a lots of ITEMS in TC in bulk
Replies
3
Views
2K
Befuddled
Befuddled
D
NX Help
Replies
2
Views
2K
Toost
Toost
M
  • Question
NX - Design State
Replies
3
Views
2K
Toost
Toost
please_dont_crash
  • Locked
  • Question
Creating an NX assembly directly from TC Visualization Pro, visible/selected items only
Replies
2
Views
294
NX User
NX User
IvanNX
  • Locked
  • Question
open active item in TC form NX
Replies
1
Views
82
jerry1423
jerry1423

Part and Inventory Search

Sponsor

Back
Top Bottom