Nx11 icons text issue

[Ehaviv]

Hi

Is it possible to remove icons text quickly
or as possible quickly.
From all icons.

Thank you in advanced.

 

[NutAce]

There is no setting for that, as far as I know,to do this for all icons at once. You can only define this in "customize" on the toolbars one by one.
Best guess would be to arrange for this in the ribbon tool bar files. There you can define how an icon is show.

As an example

BUTTON UG_DRAFT_VIEW_PROJECTION
RIBBON_STYLE SMALL_IMAGE

Will show only small Icon

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2

Building new PLM environment from Scratch using NX11 / TC11

 

[Ehaviv]

Hi Ronald and thank you.
I'll try it by toolbars one by one.

 

[Ehaviv]

Hi

Before I'll do that.
Is that will give me more space
in the graphics window.

Thanks again.

 

[NutAce]

Before I'll do that.
Is that will give me more space

NOt much really, but you can test that of course... I think yo will just gain 3-4 mm per toolbar at most.

It is also depending on which role you are using..The Advanced role already gives you an improvement on ribbon size (compared to the other roles)



Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2

Building new PLM environment from Scratch using NX11 / TC11

 

[Ehaviv]

Thank you very much.