NX12 and Windows 7 2

[cmacca]

Siemens has noted that NX12 is supported on Win10 and higher. We are about to upgrade from NX9 to NX12 but are still on Windows 7. Has anyone used NX12 with Windows 7, any known issues?

We will hopefully upgrade to Win10 at the end of the year and were going to go to NX11 but there is a good fix we want in NX12 so I'm hoping going to NX12 now we will be able to live with any small issues until the win10 upgrade later in the year.

NX 9.0.3.4 mp12, TC 10.1

 

[Rob_N]

No issues here, but I only have 1 Workstation with win7 and Native NX 12.
If you are on an "unsupported" platform and you have an issue you should try to reproduce it on a supported one before reporting it.


Rob

 

[phillpd]

We're also migrating from NX9 to NX12; no problems so far with NX12 on Win7.

We're also upgrading from Win7 to Win10, and NX9 runs okay on that OS too,

NX 9.0.3.4
NX 12.0.1.7 (Testing)
Windows 10

 

[PSI-CAD]

Hi,
One of my customer found an issue when plotting with NX12 on Windows 7. It worked well with NX11.
The result is wrong on the plotter. Have a look at the scanned result
Does anybody encountered the same problem ?

Regards
Didier Psaltopoulos

http://www.psi-cad.fr

 

[mechjames]

No issues as far as I see...

cheers, James

 

[Charlzow]

Hi DidierPSICAD,

I face the same issue on plotting on NX12 as the printed page with 5 or more duplicated image, did u manage to figure out the solution?

Charles Ow
NX 12 Tester

 

[PSI-CAD]

Hi Charlzow,

Oups I have Forgotten to post the solution.

I am not at my office today, so let me return then I will give you the solution tomorrow.


Regards
Didier Psaltopoulos

http://www.psi-cad.fr

 

[PSI-CAD]

Hi Charlzow,

Here is the worharound:

Rename the folder ...UGNX12\NXPLOT to NXPLOT_OLD

Copy the folder NXPLOT from NX11 to ...\UGNX12

I hope this help

[URL unfurl="true"]https://res.cloudinary.com/engineering-com/image/upload/v1528280283/tips/Plot_NX12_on_windows_7_erym0g.bmp[/url]




Regards
Didier Psaltopoulos

http://www.psi-cad.fr

 

[Toost]

No new ... issues in NX12 compared to NX10 on Win7 for us.

Regards,
Tomas

 

[Charlzow]

Thanks Didier, it work!!

 

[PSI-CAD]

Hi Charlzow,

I am very happy for you.

This forum is wonderfull and I use it in both way

Regards
Didier Psaltopoulos

http://www.psi-cad.fr