NX12 edit deminsion text 2

[Lars1978]

Hi All,

Where can I change te text of a demension. I mean the dimension text not the append text...

I've found this movie but the dialog has changed in NX12

https://www.youtube.com/watch?v=o7nwxrjBKNk

Lars

Lars
NX12.0.1.7 native
Solid Edge ST10
Inventor

 

[Toost]

use the command finder, search for "edit text".
there are 2 commands with this name, one of them edits table cells, you want the other.

Regards,
Tomas

 

[jerry1423]

As far as I can tell
Edit -> Annotation -> Text -> select dimension
still works.
Get to Edit via the Menu button on the left side

Jerry J.
UGV5-NX11

 

[SDETERS]

When putting the dimension in make sure the method is set to driven. If you have it set to driving, for example doing sketches, NX will not let you override this dimension.

 

[Lars1978]

Found it.....this funtion is changed. You have to dig into style (blue A) and look for the button override dimension tekst.

Style-->text-->format...

Nice to know...

Lars
NX12.0.1.7 native
Solid Edge ST10
Inventor