Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX8.5 - Knurl Finish

Status
Not open for further replies.

ARToolingEngineer

Aerospace
May 11, 2021
52
Greetings,

Wondering if there is a way to put a knurl finish on a diameter handle body?

Thanks,

Brent
 
Replies continue below

Recommended for you

Are you talking about an actual physical knurl or simply a visual representation?

John R. Baker, P.E. (ret)
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without
 
If it's for rendering purposes, I would apply a texture map, there are several which can represent knurling. If it's something that you need to see while looking at the actual model or when creating a Drawing, just create a 'crosshatch' pattern of Lines and using Wrap Curve, Wrap the pattern of Lines on the Face of the cylindrical Body.

John R. Baker, P.E. (ret)
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor