NXPROE Translator

[PSI-CAD]

I would like to know if the PROE to NX translator is able to generate NX parametric part or only NX part with a simple body ?

Thanks in advance


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[uwam2ie]

it's only a dumb body -> rework it with ST
there is a CMM like for I-deas available for ProE to keep parameters - if you really want them

 

[PSI-CAD]

Is CMM a Siemens Software ? or a third party


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[SDETERS]

CMM for Pro-E you can get from Siemens. But The CMM (Content Migration Manager) for I-Deas was free versus you will may have to pay a certain fee for the Pro-E one I do believe. Contact GTAC and they should be able to give you all the details you need.