Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

O & K Shovel

Status
Not open for further replies.

nnjunger

Mechanical
Apr 8, 2004
54
0
0
US
I am looking for some information on an O&K RH75C shovel. I was recently transfered to a location where this shovel was in service. We are upgrading our equipment fleet, and I am trying to determine how well this shovel can support the new trucks. However, I have been unable to find a cut sheet showing loading heights, center distances, etc. I looked on the internet, but have had no luck yet, so I was hoping someone here might have the information, or could send me in the right direction. Thanks.
 
Replies continue below

Recommended for you

O&K was taken over by New Holland in the Americas
or Fiat-Hitachi in Europe.All part of the same group

The new companies may be able to supply the info, check their websites


FOETS
The truth is out there. Anyone know the URL?
4drkxud.gif
 
Thanks, I will try that, but up to now I have not had any luck. I can find some new models branded under the Terex name now, but no archived information on older equipment. You would think it would be on the information we already have, but it isn't.

Thanks again.
 
Status
Not open for further replies.
Back
Top