Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

odbreport command

Thread starter AK1984
Start date Jul 20, 2013

Status: Not open for further replies.

Jul 20, 2013

AK1984

Structural

Hi all,

I am using the odbreport command to save history data.

I am using the following syntax to save the history data (stress S22) for the element 3335

abaqus odbreport job="Job1" histregion="Element Flange-1.3335 Int Point 1 Section Point 1"

I was wondering if there is a syntax for this command in order to save history data for a given element set

Thanks alot,
Ahmed