Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Oil Filled Versus Air - Fractional Sub Motors

Status
Not open for further replies.

TZellers

Mechanical
Feb 25, 2004
72
I've done a search on this forum and on Google. It seems everyone has an opinion on air versus oil motors. What is the straight scoop? I can only imagine oil being good to moderate temps better than air, but other than that air seems better. Any thoughts?
 
Replies continue below

Recommended for you

TZellers
I agree with your assmption, but consider that probably the most important and critical phenomena for a submersible motor is the proper heat transfer of its losses, otherway it will have a reduced life due to overtemperature. Apply the OEM recomendation.
 
Suggestion: Beside electrical parameters, mechanical parameters should also be scrutinized, e.g. vibrations, noise, physical volume, etc. The oil motor has marginal edges except possibly the weight.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor