Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Oilfield Skid

Status
Not open for further replies.

Abdul Salam Basheer

Mechanical
Mar 3, 2021
2
what is the international recognized standard for structural skid for oilfield manifold?
 
Replies continue below

Recommended for you

Whatever the local fabricator wants it to be / what size channels and beams he can lay his hands on easily or whatever he built last time.

If they are being paid by the tonne you'll have something that could hold up a large building.

Manifolds and similar are not really structural, more just made big enough and strong enough to withstand the installation method.

Why do you ask?

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
There is none.

But, It must fit into its transport space and between the pipe and the dirt.

 
If they are being paid by the tonne you'll have something that could hold up a large building.[/quote said:
Hehehehehe...[bigsmile]

Rather than think climate change and the corona virus as science, think of it as the wrath of God. Feel any better?

-Dik
 
That one came from a North African country when I asked why even the smallest filter skid was made from steel that would hold up the largest pyramid and about as big and was told the local fabricator was paid by the tonne of steel used.... And they were responsible for the design.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor