Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

OKIN MOTOR ACTUATOR

Status
Not open for further replies.

2low2rl

Mechanical
Feb 18, 2008
1
I JUST GOT AN OKIN MOTOR ACTUATOR MODEL 1.28.000.108.30 AND I NEED TO KNOW WHERE I CAN FIND THE SCHEMATICS FOR THE WIRING OF IT. IT HAS 2 PLUGS A 2 PRONG WITH A FLAT ONE AND A ROUND ONE AND A 5 PRONG PLUG ALSO. I NEED TO KNOW WHAT DOES WHAT SO I CAN WIRE IT UP AND STILL HAVE IT STOP AUTOMATICALLY WHEN ITS FULLY EXTENDED AND RETRACTED. SO IF ANYONE COULD POINT ME IN THE RIGHT DIRECTION OR HELP ME FIND CONTACT INFORMATION FOR OKIN. THANKS ALOT GUYS.
 
Replies continue below

Recommended for you

Uh would you mind slapping your caps lock key a few times, it seems to be stuck.
Google is your friend.

Contact info:
Damon Fisher:
:Service Department / Tech. Lead Hand d.fisher@okinamerica.net

More
Contact Information:
Phone: 662-566-1000
Fax:: 662-566-0009
Web Address:
Mailing Address:
291 CDF Boulevard
Shannon, MS 38868




Bill
--------------------
"Why not the best?"
Jimmy Carter
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor