Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

olympian GEH250 not able to start up

Status
Not open for further replies.

Emadshaaban1987

Electrical
Apr 30, 2020
58
olympian GEH250 cracks but can’t startup ,only if fuel valve supplied directly.

With out diagnosis tool it is difficult to diagnostic the fault in ECM

Is there any way to spot which sensor by unplug the defect one or any other way
 
Replies continue below

Recommended for you

As this is an engine issue, you might be better posting in the Engine and fuel section or mechanical.

I assume you mean it "cranks over" not cracked?

Also supply a lot more details and history of this machine. what does "only if fuel valve supplied directly." mean??

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
As said above, need more info on your package.

Like which control system, 1002T or Power Wizard, if Power Wizard which version.

If Power Wizard controls then there should be a fault code.

MikeL.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor