Offset vectors gives wrong results in solution sequences that compute differential stiffness (NASTRAN SOL 105 and 106) and so when temperature load is assigned at nodes (NASTRAN SOL 101 too) reaching additional non realistic bending stress.A simple test can be done assigning offset in pshell for 2d element with a simple modelization too.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
on nastran - temperature applied load
- Thread starter 051174
- Start date
Similar threads
- Question
- Locked
- Question