Open Default Save

[haynewp]

When I open a session of Autocad 2000, when I try to close the default "drawing1.dwg" it will always prompt me to save the drawing even if I haven't done anything to it. This is also the same with any other drawing I open.

Is there a setting so that I can just close the default drawing or any other when I open it, without getting the "Save changes to ____" prompt? It seems like I have used Autocad2000 before without this problem.

 

[Hawkeye2]

It sounds to me like you have a startup application - such as acad.lsp, acad2000.lsp, s::startup or the like - placing something in the drawing space. Check these out if you haven't already done so.

 

[Tyler62]

Some command is being preformed by autocad whether you are actually doing something or not. It may be as hawkeye2 said about an .lsp file oor simply if you click a toolbar button and not actually draw something autocad will register that as a change to the drawing and prompt you to save

 

[smcadman]

Hit "F2" and you might be able to see if anything unusual was loaded or ran.

Flores